Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob stopped working after a few days, it could be due to a dead coin battery or water damage the receiver module or a damaged electronic chip. Luckily these are all easy to fix and you'll be able to get your car back to normal in no time!
Car keys can also get damaged due to the blade getting worn. This is an easy fix when you visit your local Car Key Man Auto Locksmith and let them put in a new key blade for you.
Battery
The battery of the key fob in your Peugeot 308 can sometimes die or become weak enough to send a strong signal to the car. The key fob may be inoperable and prevent you from locking or unlocking your doors or even starting your engine. You'll need a new battery on your key fob to repair this.
You'll have to purchase a new battery from an auto parts store or your local hardware store. Make sure that the battery is brand new and not sat on the shelf for too long. A fresh new battery will have greater capacity and be able to send a stronger signal to the car.
After replacing the battery, try unlocking and locking the doors of your Peugeot using the key fob. If the doors won't unlock it's possible that the receiver module inside the car is the cause. The local Peugeot dealer can reprogramme the receiver module.
The internal chip of the key fob might be damaged. You could harm your key fob if you drop it on the ground, or expose it to moisture. The rubber seals that shield the chip from moisture may be worn down over time, especially if your key ring is exposed to water for lengthy period of time, like when you submerge it in the ocean at the beach. To stop this from happening, it's important to keep your key fob safe from moisture and to never let it come in contact with water.
Water Damage
Don't let go of your key fob if it becomes wet, whether you dropped it into a pool or fumbled into a Puddle. The key fob is protected by rubber seals however, prolonged exposure to water can cause damage to its electronic chip. Because water is an excellent conductor so any water that is able to get inside the key fob may create a series of short circuits that eventually damage the chip. After taking the batteries out, clean the contacts using isopropyl, and then dry them completely before putting them back into.
Your Peugeot 308 may not start due to a dead battery. Jumper cables are an excellent option to restart the engine in case you have an additional vehicle. If the battery has a problem the battery must be replaced.
A malfunctioning receiver in the car may also block it from receiving the signal from the keyfob. The key fob could be damaged, or there could be an issue with the antenna, wiring or key fob itself. If you're using an entirely new key fob, it might need to be programmed to the vehicle. If you are unable fix the issue on your own call an expert technician. A technician who is trained in the field will be able detect the issue quickly and fix it immediately.
Radio Interference
For example, a key fob not being recognized or having a limited range usually indicate that there is a problem in the system. The interference can be transmitted or radiated, the latter resulting from power and speaker cables getting too close to electrical components. In general, rerouting cables and moving them away from these components can solve the issue.
It's unlikely someone is listening to your key fob's signal in order to steal your vehicle It's possible, however, that radio interference has ruined the signal. This is a simple issue to solve.
If you're having issues with your key fobs that aren't recognized, try a fresh battery. Also, make sure that the battery is the proper size and type. A wrongly sized battery can cause damage to the fob.
Some aftermarket alarm systems and radar detectors use the same radio frequency as your key fob, and this can cause them to interfere with your key signals. Avoid attaching these devices to your key fob.
Pairing Issues
The remote keyless entry system in a car has a receiver which receives radio frequencies from the key fob. If this receiver develops issues, you will not be in a position to start your car even if your key fob functions and can be modified. This issue can be caused in a number of ways, such as a dead coin-cell battery or water damage. peugeot 207 key fob G28CarKeys could also be failing due to a software error or internal damage in the key.
The battery for your coin in your Peugeot 308 keyfob has likely been drained. It is possible to replace it with a new battery, but it is important to choose the right battery for your key fob. If you use a battery that is not correct, it could cause more problems with the key fob, so it is recommended to use either the original or a replacement that is identical in size, voltage, and specifications.
Your Peugeot 308 keyfob may not function if it was associated with a different vehicle. You might have accidentally given the key fob to a friend, or the key was used to unlock other vehicles. You can fix this by reprogramming your key fob using an OBDII scanner. This tool will request information about your car, including its VIN or engine type. It is crucial that you enter the correct details.